HAP tool a new tool which could be with a small CNC system for combination logging.
It uses a large-size piezoelectric ceramic transducer (transducer's diameter increases 20%),
increasing the acoustic emission power, reducing the acoustic attenuation in the formation;
It use metal bellows and Acoustic-Transmission cover, improve acoustical efficiency and reduce the direct coupled wave , avoid the penetration of H2S; Logic control part of circuit use CPLD, to simplify the design, to meet requirement of the high integration and high reliability.
It could be used directly in 3700 systems ,521 systems , domestic system such as xinxiang 3000 system .
The waveform is stability when logging , interference is small ,logging-curve expectation is high.
● temperature: 150 ° C;
● pressure: 100Mpa;
● OD: 92mm;
● Length: 4270mm (probe 3240mm , line/cable 1200mm);
● speed: 1800 m / h;
● Power requirements: 180Vac ± 10V, 50 ~ 60Hz, ≈ 60mAac;
● cable-core allocation:
4 #, 6 #: AC power supply;
1 #, 3 #: acoustic logic (no MBY pulse code telemetry downhole instrument combination);
12 # 13 #: Acoustic Logic (the MBY pulse code telemetry downhole instrument combination);
# 7: acoustic signals;
# 10: Ground (cable armor skin);
● Measuring range: 40 to 198μs/ft;
● difference measurement accuracy: the △T In the range of 40 ~ 60us/ft ±2μs/ft;
△T in the range of 60 ~ 198us/ft is ±3μs/ft;
△T in the steel casing measuring 57 is ±1μs/ft;.
● Vertical resolution: 600mm;
● laterlog depth: 100mm;
● spacing and distance: 3'-2'-3 '
